Puppy Linux Discussion Forum

...
But what is actual header for code of this scripts?

makepfile.sh
# Savefile creator
# Copyright (c) alphaOS
# Written by simargl <archpup-at-gmail-dot-com> modified for DebianDog by fredx181

Or

mk-save.gtkdlg
######### Make a Save image file. Terence Becker SunBurnt Dec. 7 2013 ...

gumanzoy

... one script.

But what is actual header for code of this scripts?

makepfile.sh
# Savefile creator
# Copyright (c) alphaOS
# Written by simargl <archpup-at-gmail-dot-com> modified for DebianDog by fredx181

Or

mk-save.gtkdlg
######### Make a Save image file. Terence Becker SunBurnt Dec. 7 ...

... and rather old...I wonder what type/size USB drive maxthrottle is using??
FTR, I've never tried one of the "buntu" based Pups, I do have an older ArchPup 32 on the old Acer though, not used much. The biggest issue
looks to be where the bootloader is looking for the Puppy files on maxthrottle's USB ...

josejp2424

I leave the rox-filer package.
for those who like rox like me.
is the one I use in archpup

https://www.mediafire.com/file/xt04prkg ... kg.tar.zst

jamesbond

... distro"; hence, there are many "distros".

Hence Puppy Linux is an operating system (and also a distro), and so are KLV, DebianDog, Debian, Arch, ArchPup, Manjaro, and any other Linux distros out there.

which like all these other distros use the operating system "Linux"
"Linux" is not an ...

josejp2424

Jasper wrote: Sun May 05, 2024 4:56 am
@josejp2424

Have you abandoned further development of this OS?

No updates since your initial offering.

hi @Jasper
sorry for not answering you sooner, I was not very attentive to puppy.
I didn't really upload any updates.
I have 3 pending updates to upload.

Clarity

Recommending use of the KL's for Arch in the forum. Its current and constantly well maintained while most of all, they are supported by the developers there. There are 2 modern versions; namely
one using old x11
and one using new Wayland Both of these use modern Pipewire audio facilities with ...

Jasper

Jasper

@josejp2424

Have you abandoned further development of this OS?

No updates since your initial offering.

... sfs" for the one in newer Puppys (I normally
run various Slackware based Pups). I'm currently using kernel 4.14.173 from an Arch based Puppy (ArchPup 32 bit) from 2020 or so, LOL, and
the zdrv.sfs from that Pup as well...though I also use kernel 4.14.162 and the zdrv from an older ScPup 32 bit ...

josejp2424

rockedge wrote: Sun Feb 25, 2024 7:16 pm
Void Linux 32 bit runs some of the the latest browsers in 32 bit and does well on older computers.

Have you tried @peebee's VoidPup32 ? Puppy Linux based on Void Linux binaries and repo's.

the puppy 32 bits, from @peebee , are the most updated

Void Linux 32 bit runs some of the the latest browsers in 32 bit and does well on older computers.

Have you tried @peebee's VoidPup32 ? Puppy Linux based on Void Linux binaries and repo's.

Amaponian

ArchPup woof-ce.

https://i.postimg.cc/Z5mF81Vm/ArchPup.gif

arch packages.
I have been wanting to make a puppy with arch packages for a long time.
This version does not have JWM. It is just Openbox with Tint2 panel, jgmenu menu.
The iso is too big because it still has the devx on it. only it ...

icake

joseup2424 released ArchPup-beta-1 on Feb 1, 2023

for more information and discussions

download ArchPup-beta-1.iso (952 mb)

I have created 6 half-Chinese language pets for ArchPup-beta-1:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bookworm-21.0.8.pet (18 mb)
gcin Chinese input platform ...

... upstream kernel after running a FirstRib initrd modify script we use quite often for that purpose).

Anyway, we don't actually want to hijack this ArchPup thread; maybe the distro will be maintained. Best if you move questions regarding booting KL versions of Arch Linux to Kennel Linux KLA area. Just ...

and RAM1 (regular)

RAM1 isn't the 'regular' save direct back immediately mode. It is an early RAM mode I was experimenting with so I hardly mention it nowadays nor use it. It is actually a little bit like RAM2 except instead of simply mounting the on-media persistent upper_changes for use ...

nnriyer

Is it possible to interchange the kernel (vmlinuz) between EasyOs, Spup or vanillapup with that of archKLV and compatible with arch?

Formating by GParted of existing partition is not possible as I have already many other puppy linux running smoothly from particular section ie. nvme0nlp8.

nnriyer

Please see the below link . This was culprit for not booting EasyOs and other puppies.

https://bkhome.org/news/202211/kernel-5 ... iltin.html

I don't know whether it has any relevance to arch KLV ?

wiak I have seen this on QEMU VM's that sometimes RAM0 will start normally and RAM1 (regular), RAM2 will fail because the partition for creating then read-writing to upper_changes can't be accessed if there is no Partition Table and formatted partition. The boot to system start will hang up and ...

I would try to launch in RAM0 mode with no persistence partition being looked for:
:Puppy Linux Arch (partition nvme0n1p8, path ArchKLA)
PROTOCOL=linux
KERNEL_CMDLINE=w_bootfrom=UUID=f6d0c5d3-ea46-411c-a374-14a7e629e78f=/ArchKLA w_changes=RAM0
KERNEL_PATH=guid://f6d0c5d3-ea46-411c-a374 ...

nnriyer

Dear Gurus

Thank you for the prompt reply and extending your support. I feel only slight issue in the boot process. You may be aware that I had reported very long back that none of puppy varients and Easyos was booting from my internal nvme SSD. Upon my frequent requests, our Barry Sir pinpoint the ...

I would try to launch in RAM0 mode with no persistence partition being looked for:
:Puppy Linux Arch (partition nvme0n1p8, path ArchKLA)
PROTOCOL=linux
KERNEL_CMDLINE=w_bootfrom=UUID=f6d0c5d3-ea46-411c-a374-14a7e629e78f=/ArchKLA w_changes=RAM0
KERNEL_PATH=guid://f6d0c5d3-ea46-411c-a374-14a7e629e78f ...

No idea sorry. Looking at other stanzas would have imagined it would have booted. It obviously found the kernel and it loaded the initrd.gz, by the way (it is the init inside the initrd.gz that is saying "Seeking boot partition". But it couldn't find the boot partition thereafter which suggests it ...

nnriyer

See the folder view of frugal installation

nnriyer

Great.Last one worked. However, getting error while booting. May be issue other than boot parameters?

:Puppy Linux Arch (partition nvme0n1p8, path Arch)
PROTOCOL=linux
KERNEL_CMDLINE=w_bootfrom=UUID=f6d0c5d3-ea46-411c-a374-14a7e629e78f=/arch w_changes=RAM2
KERNEL_PATH=guid://f6d0c5d3-ea46-411c ...

Well KLA is not a Puppy so KERNEL_CMDLINE is definitely wrong. Looks to me, if bootfrom directory is ArchKLA then the stanza should probably be something like:

:Puppy Linux Arch (partition nvme0n1p8, path ArchKLA)
PROTOCOL=linux
KERNEL_CMDLINE=w_bootfrom=UUID=f6d0c5d3-ea46-411c-a374-14a7e629e78f ...

Shouldn't the directory name be the same in the path? I am not familiar with this boot loader but am interested in how it works with Kennel Linux distro's.

Currently is:
:Puppy Linux Arch (partition nvme0n1p8, path ArchKLA)
PROTOCOL=linux
KERNEL_CMDLINE=psubdir=arch pmedia=ataflash
KERNEL_PATH ...

nnriyer

QUIET=no
TIMEOUT=20
GRAPHICS=no
DEFAULT_ENTRY=1
EDITOR_ENABLED=yes
INTERFACE_BRANDING=EasyOS Limine Boot Manager

:EasyOS Kirkstone64 (partition nvme0n1p6, path easyos)
COMMENT=EasyOS bootup
PROTOCOL=linux
KERNEL_CMDLINE=rw wkg_uuid=8f0dc1a3-ef22-48b1-97d7-80cf42195846 wkg_dir=easyos
KERNEL ...

Not booting from Limine Boot Loader. I have already installed easyos with Limine. While booting it says path is not ready.

Basically that probably just means you don't have the Limine boot stanze in its menu correct for booting a KL distro. I'm sorry, I'm only familiar with grub2 boot menu ...

nnriyer

Not booting from Limine Boot Loader. I have already installed easyos with Limine. While booting it says path is not ready.

Puppy Linux Discussion Forum

Search found 139 matches: archpup

Re: Bookworm Build script

Re: Bookworm Build script

Re: ACER Aspire One not taking BionicPup32

Re: ManjaroPup64 24.01 BETA 2

Re: Whats up in Puppy World

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: How to use 2007 MacBook wireless card?

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

icake Chinese language pets for ArchPup-beta-1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1

Re: ArchPup woof-ce January 2023 Beta 1