Puppy Linux Discussion Forum

nfkhanh

Thank you for your support, @ozsouth.

nfkhanh

My router is TPLINK TL-WR940N.
But after compiling rtl8821cu on my debian yesterday, it runs perfectly.
Of cource, the same in Windows.
I think the driver has some points not capatible with F96CE4 this time.

nfkhanh

1. I withdrawed the rtl8192 (supporting my F96CE4) and inserted rtl8811/rtl8821 (AC600), puppy connects to internet. It runs and interdits to be down around every 10 seconds and then it connects again. Again and again. The firefox surfing shows that. And the notification appears with "wlan0 down".
2 ...

nfkhanh

Thank @ozsouth so much.
It runs but it's probably unstable.

nfkhanh

Thank you. I followed your instruction.
1. depmod -a ----> ok
2. modinfo rtl8821cu ----> the interface is number 1. Try other interface number 0 ----> so that I don't understand.
3. modprobe rtl8821cu ----> the module is unavailable.

nfkhanh

I tried so much many times. I found out in github about the way to compile this rtl8811cu/rtl8821cu. It's from the Dongle company, maybe a Chinese's.
I compiled and used it on my debian successfully. But on F96CE4 the compilation stucked, so I didn't see rtl8821cu.ko in whole of puppy.
Following ...

nfkhanh

After installing F96CE4 and using it for a while, the notification about "192.168.1.102 acquire on wlan0" appears about 3-5 minutes. How to turn off it permanently?
Thanks.

nfkhanh

1. Plugin TP-WN823N (support)

# usb_modeswitch -K -v 0bda -p 1a2b
Look for default devices ...
No devices in default mode found. Nothing to do. Bye!

# lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087 ...

nfkhanh

Yes,Sofiya. I followed your guidness to install that driver. I changed the method of connection manager and loaded modul. I only saw rtl8821cu pci, but not usb. I tried some module around it in list, but it wasn't succeeded.
So thank you for your kindness.
We will try later.
Sure.

nfkhanh

I've tried with your recomment. I see there is a difference. But I've not understood yet. And AC600 has not been accepted by F96-AC_4. I'll try again when I'm free.
Thank you so much.

nfkhanh

Hi all!
Calm down everybody.
Listen to Mark Knoffler.
Forget the adaptor.
"Brother in Arms"
"These mist covered mountains
Are home now for me".
Hence I love Puppy
An OS so pretty
For it, I shall forgive
It's not fault from me.
Cause that Puppy is still a Puppy.
...Todas ustedes son sympáticas.

nfkhanh

And this is screenshot after unpluging present support wireless adaptor while AC600 is still plugined.

nfkhanh

Thank rcrsn51.
Here is screenshot.

nfkhanh

This is the screenshot.
In Bus 003 I think this is anaother wireless adaptor which is supporting.
Under lsusb I cannot see AC600.

nfkhanh

Thank you for your supports.
These are some informations of the adaptor:
1. Image of the adaptor.
2. Name of adaptor: Free-Driver-USB-Wifi-Adapter-PC-AC600M-Dongle-802-11ac-Wireless-Network-Dual-Band-2-4GHz-5Ghz.
3. Name of the dowloaded driver: RTL_Driver_V1.5.zip
4. Readme.txt.

nfkhanh

Hi all!
I installed F96-CE_4 on my Lenovo M93P desktop with AC600_free_driver wireless adaptor. F96-CE_4 maybe does not have driver for this wireless adaptor. On Windows, I follow the link inside this adaptor free folder and I downloaded its driver. The link is https://bit.ly/2tsbuS7. I don't know ...

nfkhanh

I have a portable disk. This disk is formated with FAT32. On debian or windows, I can see folder including Rusian songs as screenshot. When I connect this portable disk to puppy, the folder of Russian songs is not shown. Only folder with English typing is shown (Glenn Gould).

nfkhanh

Hi all!
I have some Russian songs in a folder that named with Russian typing. This folder can be seen on Debian and Windows, but Puppy.
How can I see it on my FossaPup64_CE?
Please and thank you all.

nfkhanh

Finally, I can type Vietnamese on F96-CE now. Thanks to the advices from Chelsea80, rockedge, thinkpadfreak and Doggy.
1. I installed ibus_1.5.22, ibus-unikey_0.6.1, ibus-gtk_1.5.22, ibus-gtk3_1.5.22 with some their dependencies. <Chelsea80, rockedge>
2. I placed the codes at the end and before ...

nfkhanh

I've tried so many times to install and set up Vietnamese input for Puppy, but I/ve not got success at all. There are some packages such as ibus-unikey, scim-unikey, fcitx-unikey and xvnkb. They run in Arch, Ubuntu, Debian, but they don't run in Puppies. I've tried on Slacko, Fossa... They can dock ...

nfkhanh

Thank Chelsea08 for your guilding. I installed both iBus and iBus-unikey. But I cannot type Vietnamese.
1. ibus-daemon runs under the command in terminal. I try to add it to start-up in Puppy_Setting or Drag it from /usr/bin to /home/Startup, it still doesn't start up.
2. When ibus-daemon runs with ...

nfkhanh

Hi everybody!
I'm a newbie. I've just install F96-CE_4 on my PC. I find out it's adorable. And I'm maybe faliing in love with it . Is there someone show me how to set up Vietnamese input for this distro. Please! Because I'm Vietnamese and I work on my own PS every day. Thank you so much.

Puppy Linux Discussion Forum

Search found 22 matches

Re: How to turn off the notification about <internal ip> acquired on wlan0?

Re: How to turn off the notification about <internal ip> acquired on wlan0?

Re: How to turn off the notification about <internal ip> acquired on wlan0?

Re: How to turn off the notification about <internal ip> acquired on wlan0?

Re: How to turn off the notification about <internal ip> acquired on wlan0?

Re: How to turn off the notification about <internal ip> acquired on wlan0?

How to turn off the notification about <internal ip> acquired on wlan0?

Re: How to use AC600 (Realteak RTL8192CU) wireless adaptor?

Re: How to use AC600 (Realteak RTL8192CU) wireless adaptor?

Re: How to use AC600 (Realteak RTL8192CU) wireless adaptor?

Re: How to use AC600 (Realteak RTL8192CU) wireless adaptor?

Re: Wireless adaptor

Re: Wireless adaptor

Re: Wireless adaptor

Wireless adaptor

How to use AC600 (Realteak RTL8192CU) wireless adaptor?

Re: How to see Russian fonts in FossaPup?

How to see Russian fonts in FossaPup?

Re: How to input Vietnamese to F96-CE?

Re: How to input Vietnamese to F96-CE?

Re: Vietnamese input

How to input Vietnamese to F96-CE?