Puppy Linux Discussion Forum

bobol

I don't know this hardware but there wouldn't be a problem with the usb_modeswitch
a recurring problem with a good number of USB keys...

bobol

That's exactly it, the cheatcode sees it as an end of command. And I confirm it works with the quotes, and even better I can add the arcmods and custmods modules via this comment : load="arcmods;custmods" thank you very much again fredx181 , :thumbup2: :thumbup: :thumbup2: I'm sticking wit...

bobol

Hi fredx181 In my case I wanted to be able to launch each successful module. I explain to myself every time I evolve I want to be able to go back if I make a mistake later. Each module overlaps, I think they also need to be numbered so that they are read in the right order. now the reason for the op...

bobol

so in grub.cfg (rename in txt for upload) update corrected 2 configs with iso and without and the exemple customs modules in zip :roll: Correction (haste of my part) not load=arcmods but load=/arcmods you can test with multipe folder in optional and load one by one, with differents squashs, you will...

bobol

I think this will be useful for some (I don't think I found any similar posts): for those who want to easily launch a bunch of modules, here's a tip I found by chance (but it was what I was looking for). in grub.cfg file comment : load=/arcmods (corrected) (here arcmods eg) after change=... in your ...

bobol

Salut à tous
@juju332
il est fort probable que ce soit le driver qui soit en cause
vois si tu arrive à le faire fonctionner via
cette méthode
ou celle-ci

si ça ne fonctionne pas il faudra que tu trouves les logs correspondant .
@+

bobol

Hi evereybody @recobayu
If you run systemd
edit /etc/systemd/system/getty@tty1.service
find line (probably 28)

ExecStart=-/sbin/agetty --noclear -a root %I 38400

change user choice (here root)...
non systemd follow @fredx181 instruction...

bobol

I think I understand the complexity and therefore I am incompetent at this stage, hoping that you find the solution yourself or through a third party !

bobol

Thanks a lot fredx181 So I'm going to be able to improve my goal, which is to have a pleasant desktop, to get off to a good start... right now I'm with bookworm amd64 systemd xfce, I'll use it to sid with your method Many thanks, I'm just starting out and I hope to be able to start programming in 20...

bobol

Hi @oui,
from memory it's a shortcut, I'm not sure
CTRL + ALT + F5 at login screen

if I understood your question correctly.

bobol

Thank's for your reply @fredx181 ,
I'm going to try your advice, I'll come back if I fail...
see you later !

bobol

Dear fredx181 would it be possible to make a customizable mklive-sid for example choice of kernel release with also choice not to include the kernel (for example if we want to keep the old one to save time) Yesterday I created a sid minimal xfce4 I had a bug with X11, I switch to a build full, I the...

bobol

Salut pupco Si j'ai bien compris tu ne vois pas ton dossier partagé sur ta machine virtuel, c'est ça ? J'ai eu un cas similaire car le VboxGuestAdditions n'est pas installé (ou son driver), car normalement le dossier partagé s'affiche comme un HDD.. j'ai retrouvé le dossier partagé sous /media/... E...

bobol

in fact I summarize the "..." I think that soniabu knows the rest for which I think should not be modified in the .desktop so the essence of what I think is around the image and not the rest which for me is not to be modified (therefore specified above)... I think that --appimage-mount is ...

bobol

Very strange !
for me the problem certainly comes from the image that you want to assign to the icon
did you try another image
eg extract png inside appimage
--appimage-mount
...

bobol

soniabu Hello everyone have you tried : Icon=(name of your appimage) Icon=linphone [method : png2svg and copy svg to /usr/share/icons/hicolor/scalable/apps and reboot after + add appimagelauncher] Edit : Same error fixed = just scale your png 64x64 (must be) and show now your desired icon... hopefu...

bobol

hi fredx181 thank's for your reply i'll try all posibility to resolve it... i come back after found or not.. i think it will be difficult. So i will post when the problem is resolved First return : i915.modeset=0 load fbdev driver Display with only 1 resolution Display: x11 server: X.Org v: 1.21.1.7...

bobol

Review after xorg.conf function i915

Very bad trip..
Very strange reacts with wine and vxdk..

Cannot activate dxvk, stays on opengl
Have you tried on your side ?

bobol

I must have misunderstood,
I understood that you had 2 PCs and that on one of the 2 you could not resolve the problem even with xorg.conf.

bobol

have you try to reinstall
xserver-xorg-video-intel and vesa
...

bobol

Ok now i think i915 works i just add (create) a /etc/X11/xorg.conf (of course deleted i915.modeset=0) [ I've not tested but i think it will fix too mklive-sid ] Section "Device" Identifier "Device0" Driver "intel" EndSection https://imgvb.com/images/2023/10/05/04bb505ce...

bobol

hi fredx181 no moore resolutions with i915.enable_dc=0 in fact I would need several resolutions because certain games by wine are configured in VD (virtual desktop), and to properly do so the resolution of the OS at the same values resizes to the right size (almost fullscreen) and not in a mini wi...

bobol

Dear fredx181 i forgot to mention "systemd mklive 32bit build" thank's for reply in rdp session : (error skl_dmc_ver1_27.bin fixed by "firmware-misc-nonfree") ' '[ 20.949152] i915 0000:00:02.0: vgaarb: deactivate vga console [ 21.001119] i915 0000:00:02.0: vgaarb: changed VGA dec...

bobol

Hi everybody,
I encounter difficulties after autologin I have a black screen I am on a 32bit build someone has the same problem
Thanks in advance

bobol

Salut @pupco
que donne locale -a
dpkg -reconfigure locales
et change manuellement si rien n'y change /etc/default/locale par LANG=fr_FR.UTF-8

"SetKeyboardLayout"
1 ok
2 defile en bas "other"
3 defile bas "french"
4 defile haut (ton choix)
5...

...
@+

bobol

oui c'est bien du grub.cfg tu rajoute un menuentry avec le chemin de ton dossier puupy menuentry "Mon puppy (ex)" { search --no-floppy --fs-uuid --set=root [le même guid que ton install linux] linux /puppy(ex)/vmlinuz initrd /puppy(ex)/initrd.xz } Tu y trouvera un début ici Cela te suffit ...

bobol

Salut joz
oui il te faut juste indiquer le chemin sur ton grub
ça te suffit comme réponse ?
@+

bobol

My config Tablet core m5 515HD IGPU BullsDog systemd i686 I spent some time there but it should work for a lot of people interested Actually i'm testing games compacted (mksquashfs sfs) surprising first impression i downloaded StartWine cant launch the wines downloaded by SW but in custom choice (fo...

bobol

Thank's very much Fredx181 for all !!!

Pleasure to read you again !

bobol

I understand Fredx if I correct in your script $BASE it should work ! in my case I manually replaced it with /mnt/live/mnt/... job run perfect To be more clear 1 I boot the original bworm iso with Nguyen's grubx 2 I'm still under the ddbw iso with the config you gave me for grub.cfg, so I can inflat...

Puppy Linux Discussion Forum

Search found 38 matches

Re: How to install Broadcom BCM43142 802.11b/g/n Wireless Driver in 6.4.13 kernel?

Re: How to change directory name from "live" to "other"? Solved !

Re: How to change directory name from "live" to "other"? Solved !

Re: How to change directory name from "live" to "other"? Solved !

Re: How to change directory name from "live" to "other"? Solved !

Re: Touchpad Lenovo Yoga 330

Re: Bookworm Build script

Re: how to start in char mode a graphic Debian like?

Re: DebianDog Sid (without systemd) + build system (mklive-sid)

Re: how to start in char mode a graphic Debian like?

Re: DebianDog Sid (without systemd) + build system (mklive-sid)

Re: DebianDog Sid (without systemd) + build system (mklive-sid)

Re: Dossier partagé en Virtual Machine & conky

Re: how to insert frequently used icons into the panel.

Re: how to insert frequently used icons into the panel.

Re: how to insert frequently used icons into the panel.

Re: Bookworm Build script

Re: Bookworm Build script

Re: Bookworm Build script

Re: Bookworm Build script

Re: Bookworm Build script

Re: Bookworm Build script

Re: Bookworm Build script

Re: Bookworm Build script

Re: Clavier qwerty au demarrage ! Bionic 32 19.3

Re: installation de puppy bookworm sur une partition

Re: installation de puppy bookworm sur une partition

i'm testing StartWine and custom Wine...

Re: How to change directory name from "live" to "other"? Solved !

Re: How to change directory name from "live" to "other"? Solved !