Puppy Linux Discussion Forum

pemasu

Have to ask. Is it ok to ask Puppy related questions in this forum ? It sounds like that discussion goes immediately heated when it is reminded that this Puppy Linux Discussion forum is also Puppy Linux Discussion forum. Time for the poll ?

pemasu

Rerwin created diagnostic tool called pdiag about 2013 and it was added to the woof by Barry Kauler about Precise Puppy time. I still have it in Quirky Werewolf, posting from it. But when I launched easy os, older version, it wasnt there. It looks like it has been droppod out from Barrys nowaday Woo...

pemasu

It is not fixed. There is still lag, about 10 seconds.

pemasu

BarryK There was time restricted discount sale campaign of the Lenovo laptops in Finland. There was 2 different versions of the slim yoga 7 pro. Glossy one with that higher 90 Hz display and another with matte IPS panel with lower 60 Hz display panel. It had slightly slower ryzen cpu. I chose that ...

pemasu

BarryK Pristine another usb boot. After failed X, executing the code: # sed -i -e 's%HorizSync%#HorizSync%' /etc/X11/xorg.conf results in successful boot to the X desktop. Dont use too much time in pondering this failed X. Now that I know that it is just choosing right Xorg driver and X resolution ...

pemasu

Xorg.0.log.gz: xorg log; (12.19 KiB) Downloaded 44 times

lsmod.log.gz: lsmod content; (3.3 KiB) Downloaded 50 times

Could you do another pristine usb-stick bootup, without a password, and where X fails to start and drops you back to the commandline

@BarryK
Attached are the requested log files.

pemasu

Now checked the first boot. I remembered the sequence wrong. X fails to start. With lsmod, amdgpu.ko is loaded. Radeon.ko is not loaded. Then I did run xorgwizard and chose amdgpu driver and the resolution which is right for me. After that with xwin jwm the X starts fine. The missing step was to cho...

pemasu

I have to recreate the first boot for example with usb stick ( I have sdd install ) so that I can give you reliable info about amdgpu.ko and radeon.ko loading. I dont remember if I tried xwin jwm before failed X. I probably just did modprobe amdgpu and then xwin jwm and X started. So I need to test ...

pemasu

Lenovo yoga slim 7 pro laptop with ryzen cpu and amd radeon graphics. Kernel module amdgpu works fine. At the first boot X failed, then I did modprobe amdgpu and the X started fine. Laptop resumes from suspend, it has been problematic in earlier kernel versions when I googled about laptop. Kernel su...

pemasu

If I remove the fat partition, and the hdd does not have any fat partitions left, would the updater update vmlinuz and ucode.cpio where all the .sfs files are ( which are updated fine ) ?

pemasu

Dpup updater does not update vmlinuz and ucode.cpio in my setup. I have to manually download latest dpup and extract them. All the other files updates fine. I have small fat partition, which has EFI boot files. It is unused and I cant recall why I have it. I am not sure if that partition is the reas...

pemasu

@retiredt00. Something in that suspend.sh script prevents the suspend. I had that problem too. I just downloaded acpitool. And I have in that script only this: acpitool -s.
I use acpitool -s also with cbatticon to suspend when battery is low.

pemasu

Yes echo mem > /sys/power/state suspends (and wakes up) fine. @retiredt00. Do you have external usb drive or usb flashdrive attached and mounted when you try to suspend ? From /etc/acpi/actions/suspend.sh which /etc/acpi/LID performs when closing lid: # do not suspend if usb media mounted USBS=$(pr...

pemasu

Code: Select all

Should I add psubdir= support to frugalify?

In Puppyland people often have kennel of Puppies placed each of them on their own folder inside same partition. Because of that booting from subdir is also normal thing. So the answer is yes.

pemasu

Compiling new modules should now work fine After unsquashfsing and rebooting the creation of missing symlinks was possible and compiling the wl.ko module was successful. After placing the compiled wl.ko to the kernel module tree, depmod -a, rmmod bcma and modprobe wl, the internet connection happil...

pemasu

I created bootable beta2 using weedogit.sh script. Then I installed using android phone usb connection gcc and friends ( about 100 MB ) and then I downloaded the appropriate kernel source sfs from ozsouth. I do have working broadcom-sta driver source. I cant compile wl.ko module because I cant creat...

pemasu

apt install broadcom-sta-dkms The following additional packages will be installed: dctrl-tools distro-info-data dkms lsb-release ..... Building initial module for 5.10.101 Done. wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installati...

pemasu

Installing first libgtk3-perl et plures amica and after that installing evince et plures amica and then launching evince from terminal resulted in successful accomplishment. Missing package caused that schema was not placed or compiled at the first run.

pemasu

I have. Do you mean /var/log/apt/term.log ?

I can send snippet from installation to your pm box.

pemasu

(evince:102279): GLib-GIO-ERROR **: 19:23:50.323: Settings schema 'org.gnome.Evince' is not installed glib-compile-schemas /usr/share/glib-2.0/schemas Schema creation is not automated. But manual creation fixes this. /usr/local/petget/installpkg.sh script used to have this since 2012 ( Puppy Precis...

pemasu

First. I agree with mavrothal, that disabling subversion is not a good idea. Second. If it is possible to include kernel source sfs subversion check to the updater, it would be enough for most users. Like a question during the update: kernel is now version 6.1.99, do you want to download kernel sour...

pemasu

I suppose that you replace the row rootnoverify (hd0,1) with uuid of the boot partition. I believe grub supports uuid as well since 2009 as spesifying boot partition. Blkid in terminal displays the uuid names of every partition and also PARTUUID I used in the kernel row. I just copied the example by...

pemasu

viewtopic.php?p=48473#p48473

@OscarTalks. See above link. I have grub4dos and in that link is working menu.lst for me. I used blkid to show right UUID and PARTUUID.

pemasu

3. Systems hangs when not in use. ( May be not able to wake up after going sleep mod) I got that also. No other way get away from black screen than press power button. I solved this by disabling screensaver ( I also changed to use Xorg but that was basically from different reason so that I can use ...

pemasu

~$ modprobe wl
modprobe: ERROR: could not insert 'wl': Exec format error

I got this error also after updating from 9.1.5 to 9.1.7. I just recompiled wl.ko again. I dont have 9.1.5 dpup anymore, but tried wl.ko compile from dpup 9.0.27 ( 5.10.0 kernel ) and also same exec format error in dpup 9.1.7.

pemasu

I checked Barry Kauler's easyos 3.2.1 and it has several remarks of improvements to the hacks-postinstall.sh script. Latest one is from year 2020. Even his script does not have --no-sandbox in google-chrome-* exec line. But easyos has another ways launch those browsers I believe, non root mechanism ...

pemasu

Well. @Maybe was speaking about using google-chrome and they can be installed using ppm and /usr/local/petget/installpkg.sh just by clicking the .deb and I suppose that was what @Maybe was reporting. The installed google-chrome and other browsers didnt launch after installation. I maybe speak ppm an...

pemasu

You'll need to run them as spot, they refuse to run as root (that's normal, true for any distro). Not true. /usr/local/petget/hacks-postinstall.sh takes care of that for vlc and google-chrome-* using bbe to remove root restriction. The script is not updated for --no-sandbox: exec /opt/google/chrome...

pemasu

I used simple_updater script for updating from 9.1.5 to 9.1.7. The script demanded to find in /dev/disk/by-label/ certain dpup names like vanilladpup_bios. I created vanilladpup_bios name for partition using gparted. After that simple_updater worked and updated sfs files. It also tried to update ini...

pemasu

This should do the trick: $ unsquashfs kernel_sources-5.10-kernel-kit.sfs $ rm kernel_sources-5.10-kernel-kit.sfs $ mv squashfs-root/lib squashfs-root/usr/ $ mksquashfs squashfs-root kernel_sources-5.10-kernel-kit.sfs Yep. Vanilladpup 9.1.5 booted after that, kernel source sfs loaded. Compiling wl.k...

Puppy Linux Discussion Forum

Search found 35 matches

Re: Vanilla Upup 22.04.61

Re: wifi problem Dunfell 4.5 - solved

Re: Forum very slow today

Re: EasyOS 3.4.4 released

Re: EasyOS 3.4.4 released

Another pristine usb boot and logfiles

Re: EasyOS 3.4.4 released

Re: EasyOS 3.4.4 released

Re: EasyOS 3.4.4 released

Re: Vanilla dpup 9.1.X observations

Dpup updater fails

Re: Vanilla dpup 9.1.X observations

Re: Vanilla dpup 9.1.X observations

Re: Vanilla dpup 9.1.X observations

Re: KLV-Airedale-beta2 Released, Ready for Download

Re: KLV-Airedale-beta2 Released, Ready for Download

vdpup 9.1.10 wl.ko compile

Re: Vanilla dpup 9.1.X observations

Re: Vanilla dpup 9.1.X observations

After installing evince with synaptic, schemas was not generated

Re: Kernel sources - built-in or not?

Re: Vanilla Dpup 9.x (x86 and x86_64)

Re: Vanilla Dpup 9.x (x86 and x86_64)

Re: Vanilla dpup 9.1.7 observations

Re: Vanilla Dpup 9.x (x86 and x86_64)

hacks-postinstall.sh comparison

Re: Chrome, Vivaldi in VanillaDPup 9.1.x

Re: Chrome, Vivaldi in VanillaDPup 9.1.x

Vanilla dpup 9.1.X observations

Kernel source sfs problem has been fixed.