Puppy Linux Discussion Forum

linuxunix

Kernel is too old (4.16+ required) or unusable for Iris

Use a newer kernel :thumbup:

I am using BookwormPup64, and the kernel is also new. After changing several kernels, this prompt appears.
The 6.6 and 6.8 kernels also indicate this, is it not a kernel issue, or is it a compilation ...

linuxunix

Which build of Puppy are you using?

Why not share some screenshots of your error messages?

Is it the UHD Graphics 730 driver?

mpv simplescreenrecorder-2024-05-05_16.02.39.mp4
(+) Video --vid=1 (*) (h264 1920x1080 33.333fps)
(+) Audio --aid=1 (*) (vorbis 2ch 48000Hz)
libEGL warning: DRI2 ...

linuxunix

Intel N100 processor UHD core graphics card driver compatibility is poor
Which kernel does this graphics card need to use, and what content needs to be changed to maximize performance? Currently, there have been many MPV playback prompts that do not support it, and even hard solutions are not possible

linuxunix

How to compile xapp 2.6.1?

At a glance it looks like you would compile it with meson and ninja
When asking questions like that it would be helpful if you could post a link to source code and any other information so that we don't have to go searching for it.

http://deb.debian.org/debian/pool ...

linuxunix

How to compile xapp 2.6.1?

linuxunix

Dpupsave aaaasave
I don't like such a long name, sometimes it's difficult to remember using multiple backups for different purposes.
I just want to know, I like aaasave, bbbsave, cccsave, and how should I modify folders with different names?
Or just use the aaasave folder, who can help modify it.
I ...

linuxunix

Savefolder
I don't like to add a "-" line in the saved folder, for example, I like aaabbbsave. How can I modify it to ensure that it will load when I start up?

I hope that the XXXSave directory under the installation Puppy directory can be recognized and mounted. How should I modify it?

linuxunix

When shutting down, saving data in a folder, I usually name it aaasave. In other Puppy Linux, it can be recognized and booted normally during startup, but it cannot recognize the mount when Bookworm Pup64 starts up. How should it recognize it?

linuxunix

Unable to recognize the saved folder.
Other Puppylinux can recognize the name of the saved folder, such as aaasave, but this one doesn't work. It doesn't mount the data already saved in the folder when booting up/copy/aaasave

How can I automatically identify and mount saved data?
I want it to ...

linuxunix

@dancytron - this kernel is on archive.org (see below). I usually wait a few days after posting there, then remove mediafire links.
The forum kernels section should reflect this change. Sorry, I forgot to come back to this thread & fix it.

https://archive.org/download/Puppy_Linux_Huge-Kernels ...

linuxunix

Previously, when using other Puppy Linux, it was just a matter of compiling the kernel source code and. config directly. However, when using it, it always pops up a reset and keeps asking questions without automatically compiling. What is the reason for this? How to modify it?

I don't know how to ...

linuxunix

It can't be used under xfce. After clicking Start, you can't see anything

linuxunix

@linuxunix :-

Uhh----o-kay. What exactly is it you want to do here?

Do I understand that you want to run Chrome as 'root' rather than 'spot'? If so, yes; it CAN be done.....but you lose all the sandboxing, hence you've immediately lost Chrome's security advantages.

Unfortunately, you can't 'run ...

linuxunix

You can run Chrome directly, but can't run root? How can I change it to be the same as FossaPup64 9.5?
Not just chrome, but similar software. How do you want to modify it?
It is hoped that the software of the Electron class can run directly

linuxunix

Let it be the default, which file should be modified? No need to reset after booting

linuxunix

You can Google/DuckDuckGo for resolv.conf for more information.

It should be dhcpcd that creates and modifies /etc/resolv.conf.

In the documentation, if resolv.conf is a symlink, then dhcpcd will not overwrite resolv.conf.

AFAIK, every time your network connects and each time it reconnects ...

linuxunix

Can Frisbee modify dns alone?

AFAIK, you can do exactly that by configuring your preferred DNS address or addresses in file /etc/resolv.conf.head for example:

#CloudFlare
nameserver 1.1.1.1
nameserver 1.0.0.1
#IBM Quad9
nameserver 9.9.9.9
#end head

For each url (web page name) this will ...

linuxunix

Can't log in after installing vsftpd, the login prompt is:
530 Login incorrect.
Login failed.

linuxunix

How does Frisbee connect hidden WiFi?

For me, Frisbee does not connect to hidden networks, because there is no way to tell it the network name (SSID) since it is hidden when Frisbee scans for available networks. But supporting hidden networks seems reasonable, to allow users to hide their own ...

linuxunix

After using it, it can enter the system normally, and the driver is also normal, but it cannot be shut down normally.

linuxunix

Can't UExtract decompress encrypted files?

It can. At least it's supposed to (for the supported formats).

Can't enter the password when it appears?

I can. Sometimes it's echoed and sometimes it's not, depends on the backend utility.

Is it normal for you?

It is.

Greetings!

The ...

linuxunix

BarryK wrote: Fri Dec 03, 2021 3:46 pm
@linuxunix
If you want the patched kernel source, here is 5.10.83, with the patches that 1kernel.sh applies:

http://distro.ibiblio.org/easyos/source/kernel/5.10.x/

It has the latest aufs patch, for 5.10.82+ kernels.

I will leave it online for about a week.

thank you very much!

linuxunix

I don't know why it failed to compile. It compiles ok for me.

"Asked a lot questions" sounds ominous.

It seems very much like the patches are not getting applied properly.

After asking you to enter "5.10.81" and then enter again, the script should only ask to press enter to configure the kernel ...

linuxunix

The other patch is finished, but this patch does not work:
aufs-allow-sfs.patch
patch -p1 <../aufs-allow-sfs.patch
can't find file to patch at input line 4
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff -Naur aufs4-4.11.7 ...

linuxunix

The other patch is finished, but this patch does not work:
aufs-allow-sfs.patch
patch -p1 <../aufs-allow-sfs.patch
can't find file to patch at input line 4
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff -Naur aufs4-4.11.7 ...

linuxunix

no one has to compile a kernel....unless they want too.

........have to start somewhere I guess.

The current other new kernels are not working properly, the mouse is drifting, and Barry's 5.10.81 is used normally, but the virtualbox cannot be compiled with its kernel source code, because it ...

linuxunix

JASpup wrote: Mon Nov 29, 2021 9:37 am
beginner?

Is there a tutorial on compiling the kernel?

linuxunix

patch-5.10.81 is supposed to be applied to 5.10.0. It contains the delta between 5.10.0 and 5.10.81.

Either download the 5.10.81 sources and skip the patch, or get 5.10.0 and apply the patch (and apply it only once).

Thanks for answering! However, the compilation failed, and the error message ...

linuxunix

This can happen if the kernel you're trying to patch is not 5.10.0, or if you applied the patch already.

No, the kernel I downloaded is
https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.81.tar.xz
The patch download address is:
http://distro.ibiblio.org/easyos/source/kernel/5.10.x/5.10.81 ...

linuxunix

patch -p1 <../aufs-allow-sfs.patch
can't find file to patch at input line 4
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff -Naur aufs4-4.11.7-20170711ORIG/fs/aufs/loop.c aufs4-4.11.7-20170711/fs/aufs/loop.c
|--- aufs4-4.11.7 ...

Puppy Linux Discussion Forum

Search found 100 matches

Re: Intel N100 processor UHD core graphics card driver compatibility is poor

Re: Intel N100 processor UHD core graphics card driver compatibility is poor

Intel N100 processor UHD core graphics card driver compatibility is poor

Re: Bookworm Pup64 10.0

Re: Bookworm Pup64 10.0

Re: Unable to recognize the saved folder.

Re: Unable to recognize the saved folder.

Re: Unable to recognize the saved folder.

Unable to recognize the saved folder.

Re: trying to change kernels

Re: Bookworm Pup64 10.0

Re: ptm timer 3.0 pet

Re: FossaPup64 9.5 can run Chrome

How to run Chrome as root in FossaPup64 9.5?

How to set system time default is hardware time

Re: Puppy Network Managers - SNS, Frisbee, NetWiz, Pgprs, Pupdial

Re: Puppy Network Managers - SNS, Frisbee, NetWiz, Pgprs, Pupdial

Can't log in after installing vsftpd

Re: Puppy Network Managers - SNS, Frisbee, NetWiz, Pgprs, Pupdial

Re: 5.16.14-RE SMP PREEMPT

Re: UExtract-4.6 - A Universal/Utter/Ultimate/Uhatever Extractor

Re: How to patch the kernel?aufs-allow-sfs.patch (Solved)

Re: How to patch the kernel?aufs-allow-sfs.patch

Re: How to patch the kernel?aufs-allow-sfs.patch

Re: How to patch the kernel?aufs-allow-sfs.patch

Re: How to patch the kernel?

Re: How to patch the kernel?

Re: How to patch the kernel?

Re: How to patch the kernel?

How to patch the kernel?aufs-allow-sfs.patch (Solved)