Puppy Linux Discussion Forum

ironsniper1

Other 32-bit recent puppy versions released between 2016 - 2020 Other 32-bit "official" puppy versions 32-bit Tahrpup 6.0.6 is final http://distro.ibiblio.org/puppylinux/puppy-tahr/iso/tahrpup%20-6.0-CE/ 32-bit Xenial 7.5 http://distro.ibiblio.org/puppylinux/puppy-xenial/32/ 32-bit slacko 6.3.2 ...

ironsniper1

On my bionicpup32 mtp-probe is not located in /etc/udev/ it is located in /lib/udev/ It should probably be in /etc/udev/ It looks like all the /etc/udev/ files have been relocated to /lib/udev/ and the system does not know? I don't know if copying those files over will fix anything. It may ...

ironsniper1

I am out of bullets. I suggest try a different puppy version These are all relatively late model compared to your hardware (except maybe the lagacy stuff) https://puppylinux.rockedge.org/viewforum.php?f=114 The Bionic64 is the other latest official release and is authored by a different developer ...

ironsniper1

blocked all of those and added the ones we want and still no wifi also there is this under lsmod Please be more specific. Did you check for devices using lspci Did you try to ADDLIST the ath3k driver as suggested if the lspci output did not show the atheros device? If you have done both of those ...

ironsniper1

lspci indicates your card is not recognized. You have already established that it works. Your pcie sdio device should show up in the lspci output. Mine do. lsmod indicates there are some bluetooth drivers that are loaded that are not associated with your card. btusb 26068 0 btbcm btintel 6048 1 ...

ironsniper1

lspci indicates your card is not recognized. You have already established that it works. Your pcie sdio device should show up in the lspci output. Mine do. lsmod indicates there are some bluetooth drivers that are loaded that are not associated with your card. btusb 26068 0 btbcm btintel 6048 1 ...

ironsniper1

First I would check the rfkill list to verify the card is not blocked. You can skiplist the ath3k module by editing /etc/rc.d/ MODULESCONFIG by adding it, with a space on either side, to to the line beginning SKIPLIST= Then either run depmod in terminal & restart X, or reboot. You can also force ...

ironsniper1

hey everyone i found this https://forums.linuxmint.com/viewtopic.php?t=185387 i am getting the same error though it is a error -32 and not a -110 is there a way for me to do this on puppy to see if it will fix my issue? First I would check the rfkill list to verify the card is not blocked. You can ...

ironsniper1

hey everyone i found this https://forums.linuxmint.com/viewtopic.php?t=185387 i am getting the same error though it is a error -32 and not a -110 is there a way for me to do this on puppy to see if it will fix my issue?

ironsniper1

can i use ndis wrapper to install drivers for the LAN7500 chipset which is in the stand and controls the USB ports and ethernet port of the stand I also found this, it seems my card should work with the bluetooth https://web.archive.org/web/20120114071152/https://wireless.kernel.org/en/users/Drivers ...

ironsniper1

@ironsniper1 :- I'm curious, I have to admit. Why the insistence on getting an internal card functional, when there are plenty of USB 'nano'-sized wifi dongles around these days that are extremely Linux-friendly..? Or is it the fact that you would have one USB port permanently occupied, and not ...

ironsniper1

Nope nothing shows up

ironsniper1

bigpup wrote: ↑Sun Aug 09, 2020 1:40 am That is kind of saying that command not needed. What it does is already done.

What about after you did all the other commands?

nothing happens I just get that error

ironsniper1

bigpup wrote: ↑Sun Aug 09, 2020 1:34 am Nothing is ever simple and easy with WIFI.

Kind of need to know the error!

Code: Select all

rmmod: ERROR: Module sdhci_pci is builtin.

ironsniper1

Code: Select all

rmmod sdhci_pci
rmmod sdhci

i cant remember the exact error but I do get an error when I run those commands

ironsniper1

that sounded a bit rude, every place I look online about this card every site has said it has the same atheros chipset so I don't know what to tell you, it works on windows 7 but windows 7 is a dog on this thing, now maybe the issue is because its a wireless and a Bluetooth card in one I don't know ...

ironsniper1

Bluetooth support, is another issue to track down, but not the big one to fix. Did you have the USB WIFI adapter plugged in when you did these terminal commands? If yes. Run them with the USB WIFI adapter not plugged in. Puppy does not handle multiple WIFI devices. It only wants to see one. I would ...

ironsniper1

okay i got puppy reinstalled and went to the terminal and did the dmesg command and check out the highlighted section https://cdn.discordapp.com/attachments/360145827852845076/741792978087051350/image0.jpg also running this command dmesg | grep -i sdio i get this mmc0: error -110 whilst initialising ...

ironsniper1

bigpup wrote: ↑Sat Aug 08, 2020 4:26 pm In that Windows device info program.
If you double click on the dell 1535c entry.
It should provide more info.

it doesn't tell you stuff like chipset or anything like that its all very basic info

ironsniper1

tried using ndis wrapper but all the drivers I tried didn't work or it would throw an error, I will have to reinstall puppy to get back to getting it to work again

ironsniper1

bigpup wrote: ↑Fri Aug 07, 2020 11:23 pm What info does Windows 7 give you about the WIFI card?

ironsniper1

lsusb shows the usb wireless and lspci does not have anything for the wireless, also to test to see if the wifi card even works I am going to reinstall windows 7 real quick and see if it works in there and then reinstall linux after it has a mini pcie DW1535C wifi card that is not working in Linux ...

ironsniper1

lsusb shows the usb wireless and lspci does not have anything for the wireless, also to test to see if the wifi card even works I am going to reinstall windows 7 real quick and see if it works in there and then reinstall linux after it has a mini pcie DW1535C wifi card that is not working in Linux ...

ironsniper1

If I am finding the correct information. The Dell DW1535C wifi caed. Has the Atheros AR6003X chip set. This uses the ath6kl driver. Uses the ath6k firmware. Looking in Bionicpup32 8.0 It has the ath6kl driver and ath6k firmware, with specific AR6003 support files. So if the wifi card is good and ...

ironsniper1

Doing a google search lead to it possibly being Atheros ARS263 (Atheros AR6003X-BC2B). There are a couple of folders in the fdrv for AR6003. https://wikidevi.wi-cat.ru/Atheros_ARS263 Check if any information is output in dmesg . In a terminal: dmesg | grep wifi running that command I get the output ...

ironsniper1

The problem with the WIFI is finding out what make and model the WIFI card is. You probably need the firmware and driver module for it. But can only guess what they are, without knowing make and model of the WIFI card. Could try Xenialpup 7.5 or even Tahrpup 6.0.5 Puppy versions. Maybe Atomicpup ...

ironsniper1

bigpup wrote: ↑Fri Aug 07, 2020 1:12 am For your WIFI.

menu->System->Boot Manager->Modules->Add new module

See if you can find this module to add:

ath6kl

If yes. Any help?

i added them and nothing happened and I rebooted and nothing happened

ironsniper1

i think if i remember right its a DW1535c

https://www.dell.com/support/article/en ... de?lang=en

ironsniper1

bigpup wrote: ↑Fri Aug 07, 2020 12:37 am I typed when you did.
See my above post.

oh the wifi card yes there is one and the antenna is plugged in as well, I have an old USB wireless card but only one working USB port is there a way to probe for the other ports to see if it may find and install a driver for them to get those working?

ironsniper1

bigpup wrote: ↑Fri Aug 07, 2020 12:31 am Did you try the steps I posted?

if you mean the bios thing yes and it didn't do anything

Puppy Linux Discussion Forum

Search found 34 matches

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)

Re: How to use wifi and touch screen in Dell Latitude ST? (BionicPup32)